Easily Join Workpieces at 90-Degree Angles Joining workpieces at 90-degree angles is easy with the Right Angle Clamp. Its steel pin fits snugly into a pocket hole to clamp the pieces together as you drive your screw into the adjacent hole. Using the Right Angle Clamp is like having a helper on hand to hold materials at a perfect 90 degrees. Clamp Using the Pocket Hole The steel pin on this clamp is shaped to fit snuggly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw in an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you. Swivel Pad for Solid Clamping The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting. Ultra-Wide Reach Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done. Use One Clamp, or Use Two Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.
Right Angle Clamp
- Specification Wood thicknesses from 12mm (1/2")* to 38mm (1-1/2") * Requires the use of use of a sacrificial board, or clamping to a work surface/bench.