This intermediate pillar/bench drill has the same features as the smaller pillar drill but with additional functionality and a greater drilling capacity. It is ideally suited to the small-medium workshop or light tradesman. The drill is fitted with a 450w induction motor for smooth and quiet running. The twelve pre-set speeds are changed via the multi-pulley(3) and V-belt(2)system. The pulley cover is fitted with a safety micro switch to stop accidental starting of the drill with the pulley cover open. The Drill also has a No-Volt Safety Switch with (bang stop) fitted to the front of the drill so if the power goes off to the drill, the drill will not restart itself without the user pressing the on button again, as well as a telescopic chuck guard. The spindle stroke depth stop is built into the handle mechanism to allow quick and easy set up of repetitive drilling. The drill body is made of cast iron for strength and rigidity, and the working table has the facility to tilt 180° in either direction,or swung out of the way to allow drilling of larger items that can be mounted onto the base plate, whilst raising or lowering of the table is done using a handle connected to a rack & pinion for easy and accurate setting. Key Features: • Centre of chuck to column 126mm • Chuck capacity from 3 to 16mm • Chuck stroke 60mm • 12 speeds from 230 to 2470rpm • Tilting workbench with grooves for vice fitment • Aluminium pulleys for silent operation • Ease of use handle with innovative design
Fox 12 Speed Intermediate Pillar/Bench Drill
- Technical Specification Motor: 450W(0.65hp) Speeds: 12 Pre-Set (180-2740rpm) Chuck: Taper B16 Key Type Column Diameter: 60mm Spindle Stroke: 80mm Chuck Capacity: 3.0-16mm Centre of Chuck To Column: 126mm Max Drilling Capacity: 16mm Overall Height: 840mm Weight: 25kg Voltage: 230v PLEASE NOTE: NOT ALL FOX STATIONARY MACHINERY IS HELD IN STOCK IN OUR STORE FOR COLLECTION. PLEASE CALL US TO CONFIRM WE HAVE THE FOX ITEM YOU REQUIRE IN STOCK PRIOR TO YOUR DEPARTURE.